China 2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV Manufacturer and Supplier

2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Ms Sealant 920, Spray Pu System, Flexible Foam System, As a result of our hard perform, we have always been around the forefront of clean technology merchandise innovation. We've been a eco-friendly partner you can rely on. Get hold of us today for additional data!

2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV Detail:

Doncool 102 HCFC-141B base blend polyols

INTRODUCTION

DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,

1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity

2. Excellent low temperature dimension stability and cohesiveness

3. Demould time 6~8 minutes

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	300-360
Dynamic viscosity（25℃） mPa.S	250-500
Specific gravity (20℃) g/ml	1.10-1.15
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
POL: ISO	1.0:1.1

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12±2	10±2
Gel time s	70-90	50-70
Tack free time s	100-120	80-100
Free density kg/m³	24-26	24-26

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥92%
Thermal conductivity （15℃）	GB/T 3399	≤19 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We have been ready to share our knowledge of advertising and marketing worldwide and recommend you suitable products and solutions at most competitive price ranges. So Profi Tools supply you best benefit of money and we're ready to create with each other with 2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Lesotho, Ireland, Barbados, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.

Castable Polyurethane Shoe Upper Prepolymer

Donboiler 212 Hcfc-141b Base Blend Polyols

Doncool 103 Cp/Ip Base Blend Polyols

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

Low Hardness Polyurethane System

Pu Binder For Bonding Scrap Foam

Pu Binder For Mould Processing Product

Pu System For Pipeline Insulation

Thermoplastic Polyurethane Resin

Three Component Mdi Polyurethane System Mdi

We are old friends, the company's product quality has been always very good and this time the price is also very cheap.

By Evangeline from Greece - 2017.06.29 18:55

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.

By Edward from Johannesburg - 2017.08.28 16:02

Write your message here and send it to us