2019 China New Design Ppg1000 1000 - Pu Foam Insole System – INOV
2019 China New Design Ppg1000 1000 - Pu Foam Insole System – INOV Detail:
Pu Foam Insole System
INTRODUCTION
PU foam insole system is the polyether based materials, being used for the production of flexible polyurethane foot beds and sock liners. The final wares enjoy good physical properties and good resilience. The insole density and hardness are adjustble.
PHYSICAL PROPERTIES
Type |
DXD-01A |
DXD-01B |
Appearance |
Milky white viscous liquid |
Colorless or light yellow liquid. |
Mix ratio(by weight) |
100 |
55~60 |
Material temperature(℃) |
35~40 |
35~40 |
Mould temperature(℃) |
50~55 |
|
Cream time(s) |
16~18 |
|
Rise time(s) |
22~24 |
|
Gel time(s) |
120~140 |
|
Free rise foam density(g/cm3) |
0.15~0.2 |
|
Demould time(min) |
3 |
|
Product density(g/cm3) |
0.2~0.3 |
|
Hardness(Shore C) |
30~40 |
|
Tensile strength(MPa) |
0.45-0.50 |
|
Tear strength(KN/m) |
2.50-2.60 |
|
Elongation(%) |
280-300 |
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 2019 China New Design Ppg1000 1000 - Pu Foam Insole System – INOV , The product will supply to all over the world, such as: Nepal, kazakhstan, Moldova, We'll continue to devote ourselves to market & product development and build a well-knit service to our customer to create a more prosperous future. Please contact us today to find out how we can work together.
By Marjorie from Tanzania - 2018.06.18 19:26
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Mildred from Slovakia - 2017.06.16 18:23
Write your message here and send it to us