China 2019 China New Design Ppg1000 1000 - Pu Safety Shoe Sole System – INOV Manufacturer and Supplier

2019 China New Design Ppg1000 1000 - Pu Safety Shoe Sole System – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We now have our own gross sales team, style and design workforce, technical crew, QC workforce and package group. We now have strict quality manage procedures for each system. Also, all of our workers are experienced in printing industry for Mdi Polyurethane Resin Mdi, Mdi Elastomer Mdi, Ms Sealant 910, We hope we are able to have a pleasant partnership with businessman from all over the environment.

2019 China New Design Ppg1000 1000 - Pu Safety Shoe Sole System – INOV Detail:

Pu Safety Shoe Sole System

INTRODUCTION

PU Safety shoe-sole system is used to make safety shoe outsoles and inner soles. It is polyester-based PU system material, consist of four components, polyol, ISO, hardner and catalyst. The processing of the system is two components. The catalyst, harder, blowing agent and pigment should be mixed thoroughly with the polyol component EXD-3270A, then mix with ISO component EXD-3119B for making final wares.

PHYSICAL PROPERTIES

A, Inner soles of safety shoe-sole preparing method:

Items	EXD-3270A	EXD-3119B
Ratio（weight ratio）	100	85~88
Material temperature（℃）	45~50	45~50
Rise time（s）	5~7
Tack free time（s）	30~50
Free foam density （g/cm³）	0.35~0.4
Mould temperature（℃）	45~55
Product density（g/cm³）	0.5~0.55
Hardness（Shore A）	55~65
Demould time（min）	3
Elongation at break （%）	≥550
Tear strength（KN/m）	≥22
Tensile strength （MPa）	≥6.0
Ross flexing room temperature	50,000 times no crack

B, Outsoles of safety shoe-sole preparing method:

Items	EXD-3270A	EXD-3119B
Ratio（weight ratio）	100	82~85
Material temperature（℃）	45~50	45~50
Rise time（s）	5~7
Tack free time（s）	30~50
Free foam density （g/cm³）	0.55~0.6
Mould temperature（℃）	45~55
Product density（g/cm³）	0.6~0.8
Hardness（Shore A）	65~75
Demould time（min）	3
Elongation at break （%）	≥600
Tear strength（KN/m）	≥28
Tensile strength （MPa）	≥7.3
Ross flexing room temperature	50,000 times no crack
Demould time(min)	3
Product density(g/cm³)	0.2~0.3
Hardness(Shore C)	30~40
Tensile strength(MPa)	0.45-0.50
Tear strength(KN/m)	2.50-2.60
Elongation(%)	280-300

Product detail pictures:

Related Product Guide:

Every single member from our large efficiency revenue team values customers' wants and company communication for 2019 China New Design Ppg1000 1000 - Pu Safety Shoe Sole System – INOV , The product will supply to all over the world, such as: Yemen, Qatar, Holland, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, now we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

Eda Base Eda

Fast Demold

Memory Foam

Molded Foam

Pu Chemicals

Pu Groutings

Pu Shoe-Sole Material Footwear Foam System

Shoulder Pad

Solar Heater

Sport Court

In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!

By Adam from Madrid - 2017.09.26 12:12

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Belle from Liverpool - 2017.10.27 12:12

Write your message here and send it to us