2019 Good Quality Pu Groutings - Pu Mould Resin – INOV
2019 Good Quality Pu Groutings - Pu Mould Resin – INOV Detail:
Pu Mould Resin
COMPOSITION
It consists of A&B component, A is polyol, and B is Iso-terminated polyurethane prepolymer.
CHARACTERISTICS
It has excellent processing properties, short gel time, solid in common temperature. The finished product has good properties of abrasion resistance, anti-hydrolyzing, transparence, good resilience and stable dimension.
APPLICATION
Used for making shoe and different kind of PU moulds. Substitute of Silicon rubber to make the mould of cultural stone.
STORAGE
Store in a cool and dry place. If you can’t use one drum up at one time, please fill Nitrogen gas and seal the drum well. The shelf life of original packing is 6 months.
PHYSICAL PROPERTIES
B |
Type | DM1295-B | |||
Appearance | Colorless or light yellow transparent liquid | ||||
Viscosity(30℃)mPa·s/ | 1500±150 | ||||
A |
Type | DM1260-A | DM1270-A | DM1280-A | DM1290-A |
Appearance | Light yellow liquid | ||||
Viscosity(30℃)/mPa·s | 560±200 | 650±100 | 750±100 | 850±100 | |
Ratio A:B(mass ratio) | 1.4:1 | 1.2:1 | 1:1 | 0.7:1 | |
Operation temperature/℃ | 25~40 | ||||
Gel time(30℃)*/min | 6~15(variable) | ||||
Appearance | Light yellow liquid | ||||
Hardness (shore A) | 60±2 | 70±2 | 80±2 | 90±2 | |
Tensile strength/MPa | 6 | 8 | 10 | 12 | |
Elongation at break/ % | 500~700 | ||||
Tear strength/(kN/m) | 25 | 30 | 40 | 40 | |
Rebound/ % | 60 | 55 | 50 | 48 | |
Specific gravity(25℃)(g/ cm3) | 1.07 | 1.08 | 1.10 |
1.11 |
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of 2019 Good Quality Pu Groutings - Pu Mould Resin – INOV , The product will supply to all over the world, such as: Kenya, Seychelles, Istanbul, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
By Alice from Qatar - 2017.04.18 16:45
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Sabina from Croatia - 2018.12.30 10:21
Write your message here and send it to us