2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV
2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:
Doncool 106 CP/ HFO-1233zd base blend polyols
INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
| Appearance |
Yellowish-brown transparent liquid |
| Hydroxyl Value mgKOH/g |
320-370 |
| Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
| Specific Gravity /20℃ g/ml |
1.05-1.10 |
| Storage Temperature ℃ |
10-20 |
| Shelf life (unmixed materials)※ Month |
3 |
| Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 106 blend polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 30-32kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤18.5 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for 2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Yemen, Lyon, Chile, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Dee Lopez from Angola - 2017.05.21 12:31
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Marcy Real from India - 2018.09.16 11:31
