China 2019 High quality Ms Sealant 920 - DSPU-601 – INOV Manufacturer and Supplier

2019 High quality Ms Sealant 920 - DSPU-601 – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Persisting in "High good quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with shoppers from each overseas and domestically and get new and previous clients' high comments for Donpce Hwr-502, Blend Polyol, Polyurethane Rigid Foam System, We warmly welcome mates from all walks of life to hunt mutual cooperation and develop a more good and splendid tomorrow.

2019 High quality Ms Sealant 920 - DSPU-601 – INOV Detail:

DSPU-601

INTRODUCTION

DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.

PHYSICAL PROPERTIES

Item	Unit	Polyether component	Isocyanate component
Appearance		viscous liquid	viscous liquid
Density（20℃）	g/cm3	1.02±0.03	1.08±0.03
Dynamic Viscosity（25℃）	mPa·s	650±100	800±200
shelf life	month	6	6
Storage Temperature	℃	20-30	20-30

PRODUCT PACKAGING

200kg /drum

STORAGE

B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.

PACKAGING

DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.

POTENTIAL HAZARDS

Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.

When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).

WASTE DISPOSAL

With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.

PROPOSAL OF PROCESS

	Unit	Value	Test Methods
Mix ratio	By volume	1:1(A:B)
GT	s	5-10	GB/T 23446
Surface dry time	s	15-25	GB/T 23446
Temperature of material -part A -part B	℃	65-70
Pressure of material -Part A -Part B	PSI	2500

PHYSICAL PROPERTIES OF FINISHED PRODUCT

	DSPU-601	Unit	Test Methods
Hardness	≥80	Shore A	GB/T 531.1
Tensile Strength	≥16	MPa	GB/T 16777
Elongation at break	≥450	%	GB/T 16777
Tear strength	≥50	N/mm	GB/T 529
impervious	℃		GB/T 16777
Bibulous rate	≤5	%	GB/T 23446
solid content	100	%	GB/T 16777
Adhesive strength, dry base material	≥2	Mpa	GB/T 16777

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 2019 High quality Ms Sealant 920 - DSPU-601 – INOV , The product will supply to all over the world, such as: Benin, Sudan, New Zealand, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.

Casting Pu Shoe Mould Resin

Dopu-201 Hydrophobic Groutings

Ms Sealant 930

Ms Sealant&Ms Polymer

Polyurethane Shoe-Sole Resin

Polyurethane&Polyurea Coating

Pu Binder For Wet Pour Flooring

Pu Foam Insole System Material

Stearic Alcohol Ethoxylates

Water Reducing Agent Polyether

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!

By David Eagleson from Jamaica - 2018.04.25 16:46

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!

By Emily from Irish - 2018.06.03 10:17

Write your message here and send it to us