Best quality Pu Binder For Mould Processing Product - Donboiler 203 CP/IP base blend polyols – INOV
Best quality Pu Binder For Mould Processing Product - Donboiler 203 CP/IP base blend polyols – INOV Detail:
Donboiler 203 CP/IP base blend polyols
INTRODUCTION
DonPanel 203 blend polyols is a compound which consists of polyether polyols, surfactants, catalysts and so on in a special ratio. The foam has good thermal insulation property, light in weight, and other advantages. It is widely used in solar water heater.
PHYSICAL PROPERTY
| Appearance | Light yellow transparent viscous liquid |
| Hydroxyl value mgKOH/g | 300-400 |
| Dynamic viscosity （ 25℃） mPa.S | 300-500 |
| Density （ 20℃） g/ml | 1.02-1.07 |
| Storage temperature ℃ | 10-20 |
| Storage stability month | 6 |
RECOMMENDED RATIO
| Raw materials | pbw |
| blend polyols | 100 |
| Isocyanate | 115-125 |
Technology and Reactivity (the exact value varies depending on processing conditions)
| items | Manual mixing | High Pressure Machine |
| Raw material temperature ℃ | 20-25 | 20-25 |
| Cream time s | 8-15 | 6-10 |
| Gel time s | 70-85 | 50-65 |
| Tack free time | 90-125 | 70-95 |
| Free density kg/m3 | 28-30 | 27-29 |
FOAM PERFORMANCES
| Moulding density | GB 6343 | ≥38kg/m3 |
| Closed-cell rate | GB 10799 | ≥90% |
| Thermal conductivity（ 10℃） | GB 3399 | ≤0.019W/(m.K) |
| Compression strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811 | ≤1% |
| 24h 100℃ | ≤1% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Best quality Pu Binder For Mould Processing Product - Donboiler 203 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Sri Lanka, Houston, Macedonia, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products and solutions for our customers.
By Ivy from Italy - 2018.05.13 17:00
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Pamela from Surabaya - 2018.12.25 12:43
Write your message here and send it to us
