China Best quality Pu Binder For Mould Processing Product - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

Best quality Pu Binder For Mould Processing Product - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Seat Cushion, Seat Cushion, Castable Polyurethane Shoe Upper Prepolymer, Being a young increasing organization, we might not the best, but we have been trying our best for being your very good partner.

Best quality Pu Binder For Mould Processing Product - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Best quality Pu Binder For Mould Processing Product - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Liberia, Zimbabwe, Karachi, We sincerely hope to cooperate with customers all over the world, if you would like to have more information, make sure you kindly contact us, we have been looking forward to building up a great business relationship with you.

Castable Polyurethane Shoe Mould Prepolymer