Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV
Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV Detail:
Doncool 102 HCFC-141B base blend polyols
INTRODUCTION
DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,
1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity
2. Excellent low temperature dimension stability and cohesiveness
3. Demould time 6~8 minutes
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
300-360 |
Dynamic viscosity(25℃) mPa.S |
250-500 |
Specific gravity (20℃) g/ml |
1.10-1.15 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
POL: ISO |
1.0:1.1 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12±2 |
10±2 |
Gel time s |
70-90 |
50-70 |
Tack free time s |
100-120 |
80-100 |
Free density kg/m3 |
24-26 |
24-26 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥92% |
Thermal conductivity (15℃) | GB/T 3399 | ≤19 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Burundi, Montreal, Singapore, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By Heloise from French - 2017.09.29 11:19
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Austin Helman from Brazil - 2017.02.28 14:19