China Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Our business sticks for the basic principle of "Quality could be the life with the firm, and track record will be the soul of it" for Donboiler 214 Hfc-245fa Base Blend Polyols, Polyurethane Coating, Pu System For Block Foam, Good quality would be the key factor to the company to stand out from other competitors. Seeing is Believing, want far more info? Just trial on its items!

Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

"Quality initial, Honesty as base, Sincere support and mutual profit" is our idea, so as to build repeatedly and pursue the excellence for Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Chile, Bolivia, Czech Republic, We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients. We welcome you to contact us for more information and look forward to working with you.

Castable Polyurethane Gel Insole Prepolymer

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

High Hardness Two Component System

Polyurethane Rigid Foam System

Pu Binder For Bonding Scrap Foam

Pu Binder For Mould Processing Product

Pu System For Pipeline Insulation

Quasi Mdi-Terminated System Mdi

Solvent Resistance Curing System

Three Component Mdi Polyurethane System Mdi

This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.

By Elaine from Libya - 2018.09.19 18:37

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.

By Lilith from New Delhi - 2018.09.19 18:37

Write your message here and send it to us