Chinese Professional Rigid Polyol - Pu Foam Insole System – INOV
Chinese Professional Rigid Polyol - Pu Foam Insole System – INOV Detail:
Pu Foam Insole System
INTRODUCTION
PU foam insole system is the polyether based materials, being used for the production of flexible polyurethane foot beds and sock liners. The final wares enjoy good physical properties and good resilience. The insole density and hardness are adjustble.
PHYSICAL PROPERTIES
Type |
DXD-01A |
DXD-01B |
Appearance |
Milky white viscous liquid |
Colorless or light yellow liquid. |
Mix ratio(by weight) |
100 |
55~60 |
Material temperature(℃) |
35~40 |
35~40 |
Mould temperature(℃) |
50~55 |
|
Cream time(s) |
16~18 |
|
Rise time(s) |
22~24 |
|
Gel time(s) |
120~140 |
|
Free rise foam density(g/cm3) |
0.15~0.2 |
|
Demould time(min) |
3 |
|
Product density(g/cm3) |
0.2~0.3 |
|
Hardness(Shore C) |
30~40 |
|
Tensile strength(MPa) |
0.45-0.50 |
|
Tear strength(KN/m) |
2.50-2.60 |
|
Elongation(%) |
280-300 |
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces for Chinese Professional Rigid Polyol - Pu Foam Insole System – INOV , The product will supply to all over the world, such as: Ethiopia, Casablanca, Sudan, In the increasingly competitive market, With sincere service high quality products and well-deserved reputation, we always offer customers support on products and techniques to achieve long-term cooperation. Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.
By Ivan from Sierra Leone - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Muriel from Sheffield - 2017.08.28 16:02
Write your message here and send it to us