Chinese wholesale Thermoplastic Polyurethane Series - Doncool 105 HFC-365mfc base blend polyols – INOV
Chinese wholesale Thermoplastic Polyurethane Series - Doncool 105 HFC-365mfc base blend polyols – INOV Detail:
Doncool 105 HFC-365mfc base blend polyols
INTRODUCTION
DonCool 105 blend polyols use HFC-365mfc/227ea(93/7) as blowing agent, it applies to refrigerators, freezers, Air conditioning boards and other products thermal insulation.
PHYSICAL PROPERTY
| Appearance |
Light yellow transparent liquid |
| Hydroxyl Value mgKOH/g |
300-400 |
| Dynamic Viscosity /25℃ mPa.s |
400-500 |
| Specific Gravity /20℃ g/ml |
1.10-1.15 |
| Storage Temperature ℃ |
10-30 |
| Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 105 blend polyols |
100 |
| ISO |
130-135 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 34-36kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤21 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Chinese wholesale Thermoplastic Polyurethane Series - Doncool 105 HFC-365mfc base blend polyols – INOV , The product will supply to all over the world, such as: Swaziland, New Zealand, Turkey, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Laurel from United States - 2017.03.28 12:22
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Mandy from Southampton - 2017.05.02 11:33
