Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV
Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV Detail:
Donpanel 423 CP/IP base blend polyols for continuous PIR
INTRODUCTION
DonPanel 423 system is a four components system which consists of blend polyols, polymeric MDI, catalyst and blowing agent (pentane series). The foam has good thermal insulation property, light in weight, high compression strength and flame retardant and other advantages. It is widely used to produce continuous sandwich panels, corrugated panels etc, which applies to make cold stores, cabinets, portable shelters and so on.
PHYSICAL PROPERTY
K1-blend polyols DonPanel 423
Appearance |
Light yellow to brown transparent liquid |
OHvalue mgKOH/g |
260-300 |
Dynamic viscosity(25℃) mPa.S |
1800-2200 |
Density (20℃) g/ml |
1.10-1.16 |
Storage temperature ℃ |
10-25 |
Storage stability month |
6 |
K2-Polymeric MDI DD-44V80
Appearance |
brown transparent liquid |
NCO content % |
30.50 |
Dynamic viscosity (25℃) mPa.S |
600-700 |
Density (20℃) g/ml |
1.24 |
Storage temperature ℃ |
10-25 |
Storage stability month |
12 |
K3-Cat 2816
Appearance |
Light yellow transparent liquid |
Dynamic viscosity (25℃) mPa.S |
1200-1600 |
Density (20℃) g/ml |
0.96 |
Storage temperature ℃ |
10-25 |
Storage stability month |
6 |
RECOMMENDED RATIO
Raw materials |
pbw |
DonPanel 423 |
100 g |
Cat2816 |
1-3 g |
Pentane (Cyclopentane/Isopentane) |
7-10 g |
Polymeric MDI DD-44V80 |
135-155 g |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
Items |
Manual mixing |
High pressure machine |
Raw material temperature ℃ |
20-25 |
20-25 |
Mould temperature ℃ |
45-55 |
45-55 |
Cream time s |
10-15 |
6-10 |
Gel time s |
40-60 |
40-60 |
Free density kg/m3 |
34.0-36.0 |
33.0-35.0 |
MACHINERY FOAM PERFORMANCES
Mold density | ISO 845 |
≥38kg/m3 |
Closed-cell rate | ASTM D 2856 |
≥90% |
Thermal conductivity (15℃) | EN 12667 |
≤24mW/(m.K) |
Compression strength | EN 826 |
≥120kPa |
Adhesive strength | GB/T 16777 |
≥100kPa |
Dimensional stability 24h -30℃ | ISO 2796 |
≤0.5% |
24h -100℃ |
≤1.0% |
|
Flame retardant grade | DIN 4102 |
Level B2 (no burning) |
Water absorption ratio | GB 8810 |
≤3% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV , The product will supply to all over the world, such as: Latvia, El Salvador, Italy, With strong technical strength and advanced production equipment, and SMS people purposefully , qualified, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Elizabeth from Malta - 2017.02.28 14:19
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Maxine from Norway - 2018.08.12 12:27