Factory Cheap Hot Eda Base Eda - Pu Foam Insole System – INOV
Factory Cheap Hot Eda Base Eda - Pu Foam Insole System – INOV Detail:
Pu Foam Insole System
INTRODUCTION
PU foam insole system is the polyether based materials, being used for the production of flexible polyurethane foot beds and sock liners. The final wares enjoy good physical properties and good resilience. The insole density and hardness are adjustble.
PHYSICAL PROPERTIES
|
Type |
DXD-01A |
DXD-01B |
|
Appearance |
Milky white viscous liquid |
Colorless or light yellow liquid. |
|
Mix ratio(by weight) |
100 |
55~60 |
|
Material temperature(℃) |
35~40 |
35~40 |
|
Mould temperature(℃) |
50~55 |
|
|
Cream time(s) |
16~18 |
|
|
Rise time(s) |
22~24 |
|
|
Gel time(s) |
120~140 |
|
|
Free rise foam density(g/cm3) |
0.15~0.2 |
|
|
Demould time(min) |
3 |
|
|
Product density(g/cm3) |
0.2~0.3 |
|
|
Hardness(Shore C) |
30~40 |
|
|
Tensile strength(MPa) |
0.45-0.50 |
|
|
Tear strength(KN/m) |
2.50-2.60 |
|
|
Elongation(%) |
280-300 |
|
Product detail pictures:
Related Product Guide:
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for Factory Cheap Hot Eda Base Eda - Pu Foam Insole System – INOV , The product will supply to all over the world, such as: Buenos Aires, Bulgaria, Johor, We will do our utmost to cooperate & satisfied with you relying on top-grade quality and competitive price and best after service ,sincerely look forward to cooperating with you and make achievements in the future!
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
Write your message here and send it to us





