Factory Cheap Hot Refrigerator&Insulation Containers - Donboiler 203 CP/IP base blend polyols – INOV
Factory Cheap Hot Refrigerator&Insulation Containers - Donboiler 203 CP/IP base blend polyols – INOV Detail:
Donboiler 203 CP/IP base blend polyols
INTRODUCTION
DonPanel 203 blend polyols is a compound which consists of polyether polyols, surfactants, catalysts and so on in a special ratio. The foam has good thermal insulation property, light in weight, and other advantages. It is widely used in solar water heater.
PHYSICAL PROPERTY
Appearance | Light yellow transparent viscous liquid |
Hydroxyl value mgKOH/g | 300-400 |
Dynamic viscosity ( 25℃) mPa.S | 300-500 |
Density ( 20℃) g/ml | 1.02-1.07 |
Storage temperature ℃ | 10-20 |
Storage stability month | 6 |
RECOMMENDED RATIO
Raw materials | pbw |
blend polyols | 100 |
Isocyanate | 115-125 |
Technology and Reactivity (the exact value varies depending on processing conditions)
items | Manual mixing | High Pressure Machine |
Raw material temperature ℃ | 20-25 | 20-25 |
Cream time s | 8-15 | 6-10 |
Gel time s | 70-85 | 50-65 |
Tack free time | 90-125 | 70-95 |
Free density kg/m3 | 28-30 | 27-29 |
FOAM PERFORMANCES
Moulding density | GB 6343 | ≥38kg/m3 |
Closed-cell rate | GB 10799 | ≥90% |
Thermal conductivity( 10℃) | GB 3399 | ≤0.019W/(m.K) |
Compression strength | GB/T 8813 | ≥140kPa |
Dimensional stability 24h -20℃ | GB/T 8811 | ≤1% |
24h 100℃ | ≤1% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Factory Cheap Hot Refrigerator&Insulation Containers - Donboiler 203 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Malaysia, Orlando, Guatemala, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Kevin Ellyson from Islamabad - 2017.02.28 14:19
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Astrid from Cairo - 2018.09.12 17:18
Write your message here and send it to us