Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV
Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
360-420 |
Dynamic viscosity(25℃) mPa.S |
3000-4000 |
Specific gravity (20℃) g/ml |
1.06-1.08 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
CP or CP/IP |
12-14 |
Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12-16 |
8-12 |
Gel time s |
75-85 |
50-70 |
Tack free time s |
100-120 |
70-100 |
Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥90% |
Thermal conductivity (15℃) | GB/T 3399 | ≤22 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
With our leading technology also as our spirit of innovation,mutual cooperation, benefits and advancement, we'll build a prosperous future together with your esteemed organization for Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Indonesia, Norwegian, Sierra Leone, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question items they do not understand. We break down people barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
By Catherine from Honduras - 2017.03.08 14:45
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Fanny from Turkmenistan - 2017.09.09 10:18