Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV
Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
360-420 |
| Dynamic viscosity（25℃） mPa.S |
3000-4000 |
| Specific gravity (20℃) g/ml |
1.06-1.08 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
| CP or CP/IP |
12-14 |
| Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12-16 |
8-12 |
| Gel time s |
75-85 |
50-70 |
| Tack free time s |
100-120 |
70-100 |
| Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥90% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤22 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Factory wholesale Donfoam 603 Ecomate Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Haiti, Botswana, Finland, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. On account of superior quality and competitive price , we will be the market leader, please don’t hesitate to contact us by phone or email, if you are interested in any of our products.
By Laura from Morocco - 2018.11.06 10:04
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Matthew Tobias from Honduras - 2018.09.12 17:18
