Good Quality Polyurethane Rigid Foam - Doncool 102 HCFC-141B base blend polyols – INOV
Good Quality Polyurethane Rigid Foam - Doncool 102 HCFC-141B base blend polyols – INOV Detail:
Doncool 102 HCFC-141B base blend polyols
INTRODUCTION
DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,
1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity
2. Excellent low temperature dimension stability and cohesiveness
3. Demould time 6~8 minutes
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
300-360 |
| Dynamic viscosity（25℃） mPa.S |
250-500 |
| Specific gravity (20℃) g/ml |
1.10-1.15 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
|
POL: ISO |
1.0:1.1 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12±2 |
10±2 |
| Gel time s |
70-90 |
50-70 |
| Tack free time s |
100-120 |
80-100 |
| Free density kg/m3 |
24-26 |
24-26 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥92% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤19 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for Good Quality Polyurethane Rigid Foam - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: South Korea, Jamaica, Gambia, By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
By Amy from Congo - 2018.03.03 13:09
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Salome from Hanover - 2018.06.21 17:11
