Good quality Pu Foam Insole System Material - DDPU-301 polyurethane grouting material for rescue and relief – INOV
Good quality Pu Foam Insole System Material - DDPU-301 polyurethane grouting material for rescue and relief – INOV Detail:
DDPU-301 polyurethane grouting material for rescue and relief
INTRODUCTION
DDPU – 301 is a two-component hydrophobic polyurethane grouting material,designed for rescue and relief . The material have a very short reaction time and quickly transform from a liquid to their final foam form. This material can not only waterproof plugging, but also has a certain reinforcement and stabilization effect. It has been widely used in subway tunnels, water conservancy and hydropower, underground garage, sewer and other fields of waterproof leakage-plugging.
FEATURES
A. Rapid react with water, fast foaming expand and cure. The reaction time can be adjusted according to the amount of component A, generally can be controlled to cure in tens of seconds to minutes.
B. Chemical stability is excellent.
C. High strength. The compressive strength can go over 20MPa within a few hours when molding under airtight conditions;
D. With large infiltration radius and solidification volume ratio, rapid chemical reaction. When the material encounter water, great expansion pressure will be generated to push the slurry deep into the crack to form a tough consolidation.
TYPICAL INDEX
|
item |
index |
|
|
A component CAT. |
B component PU |
|
|
appearance |
Light yellow transparent liquid |
Tan transparent liquid |
|
density /g/cm3 |
1.05-1.10 |
1.15-1.25 |
|
viscosity/mpa·s(23±2℃) |
≤60 |
≤600 |
|
nonvolatile matter content/% |
- |
≥90 |
REACTION TIME
The reaction time depends not only on the rock temperature, but also on the product temperature.The reaction time under different catalyst dosage is measured under laboratory conditions, and it is better to conduct field experiments before grouting.
|
Temperature is 20℃，the reaction time of 10%water with different amounts of component A. |
||||
|
Component A |
5% |
10% |
15% |
20% |
|
Start reaction（s） |
15 |
13 |
10 |
10 |
|
End reaction（s） |
90 |
60 |
50 |
50 |
|
expansion rate |
Approximate 30times |
Approximate 30times |
Approximate 30times |
Approximate 30times |
CURING PERFORMANCE
|
item |
Index |
|
Density /g/cm3 |
1.05-1.3 |
|
Viscosity /mpa·s(23±2℃) |
300-600 |
|
Setting time /s |
≤90 |
|
Solid content/% |
≥82 |
|
Foaming rate/% |
≥2000 |
|
Compressive strength /MPa |
≥20 |
|
PS：Setting time can be adjusted according to customer needs； |
|
APPLICATION
A. Seam sealing and waterproof anticorrosive coating of pool, water tower, basement, air raid shelter and other buildings;
B. Anticorrosion of metal and concrete pipelines and steel structures;
C. Dust treatment ，underground tunnel or building foundation reinforcement;
D. Sealing and strengthening of deformation seams, construction joints and structural cracks in construction projects;
E. Sealing leakage and strengthening ports, wharves, piers, dams and hydropower stations;
F. Wall protection and leak plugging in geological drilling, selective water plugging in oil exploitation, and water stop-gushing in the mine, etc.
PACKAGING, STORAGE AND TRANSPORTATION
A. The product shall be stored in clean, dry and airtight iron drums with a volume of 20kg/ drum or 10kg/ drum;
B. Avoid rain, exposure, extrusion and collision during transportation to ensure the package is in good condition;
C. The product should be stored in a ventilated, dry and cool place to avoid direct sunlight and rain.Storage temperature should not be higher than 40 ℃;
D. Under normal storage conditions, the storage time is 6 months
Product detail pictures:
Related Product Guide:
While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of Good quality Pu Foam Insole System Material - DDPU-301 polyurethane grouting material for rescue and relief – INOV , The product will supply to all over the world, such as: Hungary, Costa Rica, Cyprus, Our company will adhere to "Quality first, , perfection forever, people-oriented , technology innovation"business philosophy. Hard work to keep making progress, innovation in the industry, make every effort to first-class enterprise. We try our best to build the scientific management model, to learn abundant skilled knowledge, to develop advanced production equipment and production process , to create the first-call quality solutions, reasonable price , high quality of service , quick delivery , to offer you create new value .
By Margaret from Vancouver - 2017.06.29 18:55
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Daphne from Slovak Republic - 2018.12.22 12:52
