High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV
High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV Detail:
Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam
INTRODUCTION
DonFoam 812/PIR is a kind of blend polyols with hcfc-141b foaming agent, with polyol as the main raw material, mixed with special auxiliary agent, suitable for the insulation of construction, transportation, shell and other products.The polyurethane product prepared by reacting it with isocyanate has the following advantages:
1.Foam has uniform strength and dimensional stability in all directions
2.The foam products can be cut into different shapes according to the requirements of the product
3.Excellent thermal insulation performance
PHYSICAL PROPERTY
|
DonFoam 812/PIR |
|
| Appearance
OH value mgKOH/g Dynamic viscosity （25℃） mPa.S Density （20℃） g/ml Storage temperature ℃ Storage stability ※ month |
Light yellow to brown transparent liquid 150-250 200-300 1.15-1.25 10-25 6 |
RECOMMENDED RATIO
|
Pbw |
|
| DonFoam 812/PIR
Isocyanate |
100 150-200 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
|
Manual Mix |
High pressure |
|
| Raw Material Temperature ℃
Cream time S Gel time S Tack free time S Free density Kg/m3 |
20-25 30-50 140-180 300-350 28-32 |
20-25 25-45 120-160 270-320 27-31 |
FOAM PERFORMANCES
| Overall Molding Density
Closed-cell Rate Initial Thermal Conductivity（15℃） Compressive Strength Dimensional Stability 24h -20℃ 24h 100℃ Flammability |
GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813 GB/T 8811
GB/T 8624 |
≥50 Kg/m3
≥90% ≤22mW/m.k ≥150 KPa ≤0.5% ≤1.0% B2、B1 |
Product detail pictures:
Related Product Guide:
We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV , The product will supply to all over the world, such as: Suriname, Philadelphia, Kazakhstan, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Diana from United States - 2018.06.05 13:10
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Eleanore from Rio de Janeiro - 2018.06.03 10:17
