China High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donpanel 422 HCFC-141b base blend polyols for continuous PUR – INOV Manufacturer and Supplier

High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donpanel 422 HCFC-141b base blend polyols for continuous PUR – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for Ms Resin920r, Ppg2000 2000, Solar Heater, Together with our efforts, our products have won the trust of customers and been very salable both here and abroad.

High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donpanel 422 HCFC-141b base blend polyols for continuous PUR – INOV Detail:

Donpanel 422 HCFC-141b base blend polyols for continuous PUR

INTRODUCTION

DonPanel 422/ PUR blend polyols is a compound which consists of polyether polyols, surfactants, catalysts, HCFC-141B and flame retardant in a special ratio. The foam has good thermal insulation property, light in weight, high compression strength and flame retardant and other advantages. It is widely used to produce continuous sandwich panels, corrugated panels etc, which applies to make cold stores, cabinets, portable shelters and so on.

PHYSICAL PROPERTY

Appearance	Light yellow transparent viscous liquid
Hydroxyl value mgKOH/g	300-340
Dynamic viscosity （25℃） mPa.S	300-400
Density （20℃） g/ml	1.12-1.16
Storage temperature ℃	10-25
Storage stability month	6

RECOMMENDED RATIO

Raw materials	PBW
DonPanel 422 blend polyols	100
Isocyanate	120-130

TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)

Items	Manual mixing	High temperature machine
Raw material temperature ℃	20-25	20-25
Mould temperature ℃	35-45	35-45
Cream time s	8-16	6-10
Gel time s	30-60	30-40
Free density kg/m3	28.0-35.0	33.0-35.0

FOAM PERFORMANCES

Mold density	GB 6343	≥40kg/m3
Closed-cell rate	GB 10799	≥90%
Thermal conductivity（15℃）	GB 3399	≤22mW/(m.K)
Compression strength	GB/T 8813	≥140kPa
Adhesive strength	GB/T 16777	≥120kPa
Dimensional stability 24h -20℃ 24h 100℃	GB/T 8811	≤1% ≤1.5%
Flame retardant grade	GB/T8624	B2

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for High definition Donspray 502 Hcfc-141b Base Blend Polyols - Donpanel 422 HCFC-141b base blend polyols for continuous PUR – INOV , The product will supply to all over the world, such as: Ghana, Cambodia, New Delhi, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.

Castable Polyurethane Shoe Upper Prepolymer

Donboiler 203 Cp/Ip Base Blend Polyols

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 105 Hfc-365mfc Base Blend Polyols

Donfoam 603 Ecomate Base Blend Polyols

Donspray 501 Water Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

High Hardness Two Component System

Polyurethane Rigid Foam

Polyurethane Rigid Foam System

As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.

By Victoria from Norwegian - 2018.09.08 17:09

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Dora from Romania - 2018.07.27 12:26

Write your message here and send it to us