High Quality Polyurethane Rigid Foam System - Donpipe 303 CP/IP base blend polyols for pipeline insulation – INOV
High Quality Polyurethane Rigid Foam System - Donpipe 303 CP/IP base blend polyols for pipeline insulation – INOV Detail:
Donpipe 303 CP/IP base blend polyols for pipeline insulation
INTRODUCTION
Donpipe 303 is one type of blend polyols foam system for pipe insulation, with cyclopentane as foaming agent. It is widely used in steam pipes, liquefied nature gas running pipes, oil pipes and other fields. The characteristics are as follows:
(1) good flowability, by regulating formula to suit different pipe diameters.
(2) high temperature-resistance performance,long standing in 150℃
(3) excellent low temperature dimensional stability
PHYSICAL PROPERTY
| Appearance
Dynamic viscosity（25℃） mPa.s Polyol/Cyclopentane=100/7 Density （20℃） g/ml Storage temperature ℃ Storage stability Month |
Light yellow to brown yellow transparent liquid 2000-3000（without foaming agent） 600-800（with cp） 1.10-1.16 10-25 6 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Component temperature is 20℃, the actual value is varied according to pipe diameter and processing condition.)
|
Manual mixing |
High pressure machine |
|
| Ratio（POL/ISO）
Cream time s Gel time s Tack free time s Free density kg/m3 |
1:1.0-1.1.60 20-40 80-200 ≥150 25-40 |
1:1.0-1.60 15-35 80-160 ≥150 24-38 |
FOAM PERFORMANCES
| Molded foam density
Closed-cell rate Thermal conductivity(15℃) Compressive strength Water absorption Dimensional stability (24h，100℃) (24h，-30℃) High temperature-resistance |
GB 6343 GB 10799 GB 3399 GB/T8813 GB 8810 GB/T8811 |
40-80kg/m3 ≥90% ≤ 26mW/(m.K) ≥200kPa ≤3（V/V）% ≤1.5% ≤1.0% ≤140℃ |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for High Quality Polyurethane Rigid Foam System - Donpipe 303 CP/IP base blend polyols for pipeline insulation – INOV , The product will supply to all over the world, such as: Rwanda, Colombia, Spain, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Rebecca from Australia - 2018.09.12 17:18
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Elsa from Georgia - 2017.05.02 18:28
