High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV
High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV Detail:
Donpipe 322 HCFC-141b base blend polyols for pipeline shell
INTRODUCTION
DonPipe 322 is a kind of blend polyols with hcfc-141b as foaming agent, taking polyol as the main raw material, mixing with a special auxiliary. This material suitable for outer thermal insulation shells which are used for water, oil and gas pipelines .The polyurethane product prepared by reacting it with isocyanate has the following advantages:
– good compressive strength and dimensional stability
– high close-cell rate and good waterproof performance
– good insulation performance
PHYSICAL PROPERTY
DonPipe 322 |
|
Appearance
Hydroxyl value mgKOH/g Dynamic viscosity (25℃) mPa.S Density (20℃) g/ml Storage temperature ℃ Storage stability months |
Light yellow transparent viscous liquid 200-400 200-400 1.1-1.16 10-25 6 |
RECOMMENDED RATIO
Pbw |
|
DonPipe 322
Isocyanate |
100 120-160 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
Manual mix |
High pressure |
|
Raw material temperature ℃
CT S GT S TFT S Free density Kg/m3 |
20-25 7-15 30-50 40-60 25-30 |
20-25 6-12 20-40 30-50 25-30 |
FOAM PERFORMANCES
old density
Close-cell rate Thermal conductivity (10℃) Compression strength) Dimensional stability 24h -20℃ 24h 100℃ Flammability |
GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813 GB/T 8811
GB/T 8624 |
≥50Kg/m3 ≥90% ≤22mW/m.k ≥150 KPa ≤0.5% ≤1.0% B3、B2、B1 |
Product detail pictures:
Related Product Guide:
Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV , The product will supply to all over the world, such as: Sri Lanka, Malta, USA, Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.
By Poppy from Poland - 2018.09.16 11:31
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Edith from Pretoria - 2017.09.09 10:18