Doncool 106 CP / HFO-1233zd puag muab polyols
Doncool 106 CP / HFO-1233zd puag muab polyols
TAW qHIA
DonCool 106 muab polyols siv CP tov nrog HFO-1233zd li tshuab neeg sawv cev, nws siv tau rau hauv tub yees, khov nab kuab, hluav taws xob cua sov siv dej thiab lwm yam khoom thermal rwb thaiv tsev, tus yam ntxwv raws li nram no,
1-rau yav tom ntej flowability, ua npuas ncauj ceev muab uniformity, tsis tshua muaj thermal conductivity
2- Koj tsis kub dimension stability thiab cohesiveness
3-Demoulding lub sij hawm yog 4-8min.
LUB CEV TEEJ
| tsos |
Yellowish-xim av pob tshab kua |
| Hydroxyl nqi mgKOH / g |
320-370 |
| Dynamic Viscosity / 25 ℃ mPa.s |
4000-5000 |
| Kev Lub ntiajteb txawj nqus / 20 ℃ g / ml |
1.05-1.10 |
| Cia Kub ℃ |
10-20 |
| Txee lub neej (unmixed ntaub ntawv) ※ Hlis |
3 |
| Txee lub neej (premixed ntaub ntawv) ※ Hlis |
1 (Material Kub hauv qab no 20 ℃) |
※ khw nyob rau hauv qhuav thawj drums / IBCs ntawm pom zoo cia kub.
pom zoo piv
|
PBW |
|
| DonCool 106 muab polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY THIAB reactivity CWJ PWM (Material Kub yog 20 ℃, qhov tseeb tus nqi varied raws li ib txoj kev mob)
|
Los ntawm txhais tes Nws (tsis tshua muaj siab tshuab) |
High Pressure Tshuab Nws |
|
| Cov tshuaj nplaum sij hawm s
Gel lub sij hawm s Tack dawb lub sij hawm s Dawb ceev kg / m 3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
UA NPUAS NCAUJ nrug
| Moulding Ceev | GB / T 6343 | 30-32kg / m 3 |
| Kaw-cell tus nqi | GB / T 10799 | ≥90% |
| Thermal conductivity (10 ℃) | GB / T 3399 | ≤18.5 mW / (Mk) |
| compressive zog | GB / T 8813 | ≥140kPa |
| Seem stability 24 h -20 ℃ | GB / T 8811
|
≤1.0% |
|
24 h 100 ℃ |
≤1.5% |
Cov ntaub ntawv muab saum toj no yog raug tus nqi, uas yog soj ntsuam los ntawm peb lub tuam txhab. Rau peb lub tuam txhab cov khoom, cov ntaub ntawv muaj nyob rau hauv kev cai lij choj tsis muaj xyuas.
