Hot New Products Casting Polyurethane Series Cpu - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV
Hot New Products Casting Polyurethane Series Cpu - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:
Doncool 106 CP/ HFO-1233zd base blend polyols
INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
| Appearance |
Yellowish-brown transparent liquid |
| Hydroxyl Value mgKOH/g |
320-370 |
| Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
| Specific Gravity /20℃ g/ml |
1.05-1.10 |
| Storage Temperature ℃ |
10-20 |
| Shelf life (unmixed materials)※ Month |
3 |
| Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 106 blend polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 30-32kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤18.5 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Hot New Products Casting Polyurethane Series Cpu - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: The Swiss, Moscow, Johannesburg, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By John biddlestone from Oslo - 2017.11.29 11:09
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Beatrice from Uruguay - 2018.09.23 17:37
