Hot New Products Stearic Alcohol Ethoxylates - DSPU-601 – INOV
Hot New Products Stearic Alcohol Ethoxylates - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
Item | Unit | Polyether component | Isocyanate component |
Appearance | viscous liquid | viscous liquid | |
Density(20℃) | g/cm3 | 1.02±0.03 | 1.08±0.03 |
Dynamic Viscosity(25℃) | mPa·s | 650±100 | 800±200 |
shelf life | month | 6 | 6 |
Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
Unit | Value | Test Methods | |
Mix ratio | By volume | 1:1(A:B) | |
GT | s | 5-10 | GB/T 23446 |
Surface dry time | s | 15-25 | |
Temperature of material
-part A -part B |
℃ | 65-70 | |
Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
DSPU-601 | Unit | Test Methods | |
Hardness | ≥80 | Shore A | GB/T 531.1 |
Tensile Strength | ≥16 | MPa | GB/T 16777 |
Elongation at break | ≥450 | % | |
Tear strength | ≥50 | N/mm | GB/T 529 |
impervious | ℃ | GB/T 16777 | |
Bibulous rate | ≤5 | % | GB/T 23446 |
solid content | 100 | % | GB/T 16777 |
Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Hot New Products Stearic Alcohol Ethoxylates - DSPU-601 – INOV , The product will supply to all over the world, such as: Czech republic, Montpellier, Uganda, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our merchandise are favored by domestic and foreign customers. With your support, we'll build a better tomorrow!
By Melissa from Melbourne - 2017.09.29 11:19
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Maureen from Japan - 2017.06.22 12:49