Hot New Products Stearic Alcohol Ethoxylates - DTPU-401 – INOV
Hot New Products Stearic Alcohol Ethoxylates - DTPU-401 – INOV Detail:
DOPU-201 Eco-friendly Hydrophobic Polyurethane Grouting Material
INTRODUCTION
DTPU-401 is a one component polyurethane coating with isocyanate, polyether polyol as main raw materials, moisture-curing polyurethane waterproof coating.
Especially used for horizontal plane. When this coating is applied on surface substrate, it has chemical reaction with the moisture in the air, and then it will form a seamless elastomeric rubber waterproof membrane.
APPLICATION
● Undergrounds;
● Parking garages;
● Subways in open cut method;
● Channels;
● Kitchen or bathroom;
● Floors, balcony and unexposed roofs;
● Swimming pools, man-made fountain and other pools;
● Top plate at plazas.
ADVANTAGES
● Good tensile strength and elongation;
● Both high and low temperature resistance;
● Strong adhesive;
● Seamless, no pinholes and bubbles;
● Resistance to long-term water erosion;
● Corrosion-resisting and mould-resisting;
● Convenient to apply.
TYPICAL PROPERTIES
Item | Requirement | Test Method |
Hardness | ≥50 | ASTM D 2240 |
Weight Loss | ≤20% | ASTM C 1250 |
Low temperature crack bridging | No cracking | ASTM C 1305 |
Film thickness(vertical surface) | 1.5mm±0.1mm | ASTM C 836 |
Tensile strength /MPa | 2.8 | GB/T 19250-2013 |
Elongation at break /% | 700 | GB/T 19250-2013 |
Tear strength /kN/m | 16.5 | GB/T 19250-2013 |
Stability | ≥6 months | GB/T 19250-2013 |
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
STORAGE
DTPU-401 material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources. The normal shelf life is 6 months.
TRANSPORTATION
DTPU-401 is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.
CONSTRUCTIVE SYSTEM
The system is basically consisted of substrate, additional layer, waterproof coated membrane and protection layer.
COVERAGE
1.7kg per m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.
SURFACE PREPARATION
Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.
Product detail pictures:
Related Product Guide:
We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for Hot New Products Stearic Alcohol Ethoxylates - DTPU-401 – INOV , The product will supply to all over the world, such as: Argentina, Namibia, Kuwait, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By Genevieve from Jordan - 2017.02.14 13:19
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Marguerite from Toronto - 2017.03.28 16:34