Low price for Modified Silane Rasin.Water-Stop Groutings - Doncool 103 CP/IP base blend polyols – INOV
Low price for Modified Silane Rasin.Water-Stop Groutings - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
360-420 |
Dynamic viscosity(25℃) mPa.S |
3000-4000 |
Specific gravity (20℃) g/ml |
1.06-1.08 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
CP or CP/IP |
12-14 |
Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12-16 |
8-12 |
Gel time s |
75-85 |
50-70 |
Tack free time s |
100-120 |
70-100 |
Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥90% |
Thermal conductivity (15℃) | GB/T 3399 | ≤22 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Low price for Modified Silane Rasin.Water-Stop Groutings - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: French, Cape Town, Jersey, We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
By Ellen from Chile - 2018.06.19 10:42
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Maureen from Amsterdam - 2018.11.04 10:32