Low price for Modified Silane Rasin.Water-Stop Groutings - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV
Low price for Modified Silane Rasin.Water-Stop Groutings - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV Detail:
Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam
INTRODUCTION
DonFoam 812/PIR is a kind of blend polyols with hcfc-141b foaming agent, with polyol as the main raw material, mixed with special auxiliary agent, suitable for the insulation of construction, transportation, shell and other products.The polyurethane product prepared by reacting it with isocyanate has the following advantages:
1.Foam has uniform strength and dimensional stability in all directions
2.The foam products can be cut into different shapes according to the requirements of the product
3.Excellent thermal insulation performance
PHYSICAL PROPERTY
|
DonFoam 812/PIR |
|
| Appearance
OH value mgKOH/g Dynamic viscosity （25℃） mPa.S Density （20℃） g/ml Storage temperature ℃ Storage stability ※ month |
Light yellow to brown transparent liquid 150-250 200-300 1.15-1.25 10-25 6 |
RECOMMENDED RATIO
|
Pbw |
|
| DonFoam 812/PIR
Isocyanate |
100 150-200 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
|
Manual Mix |
High pressure |
|
| Raw Material Temperature ℃
Cream time S Gel time S Tack free time S Free density Kg/m3 |
20-25 30-50 140-180 300-350 28-32 |
20-25 25-45 120-160 270-320 27-31 |
FOAM PERFORMANCES
| Overall Molding Density
Closed-cell Rate Initial Thermal Conductivity（15℃） Compressive Strength Dimensional Stability 24h -20℃ 24h 100℃ Flammability |
GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813 GB/T 8811
GB/T 8624 |
≥50 Kg/m3
≥90% ≤22mW/m.k ≥150 KPa ≤0.5% ≤1.0% B2、B1 |
Product detail pictures:
Related Product Guide:
The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for Low price for Modified Silane Rasin.Water-Stop Groutings - Donfoam 812PIR HCFC-141B base blend polyols for PIR block foam – INOV , The product will supply to all over the world, such as: Slovakia, Bangladesh, Oslo, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
By Catherine from Kuwait - 2018.09.29 17:23
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Louise from Birmingham - 2017.12.02 14:11
