China Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Low Temperature, Ms Sealant 930, Fast Crystallization Rate, Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.

Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Vancouver, Honduras, Bangladesh, We'll supply much better products with diversified designs and expert services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.

Castable Polyurethane Gel Insole Prepolymer