China Manufacturer for Pu Binder For Bonding Scrap Foam - Donpipe 301 water base blend polyols for pipeline insulation – INOV Manufacturer and Supplier

Manufacturer for Pu Binder For Bonding Scrap Foam - Donpipe 301 water base blend polyols for pipeline insulation – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of Casting Pu Shoe Mould Resin, Polyurethane Caoting, Boxing Match, We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better.

Manufacturer for Pu Binder For Bonding Scrap Foam - Donpipe 301 water base blend polyols for pipeline insulation – INOV Detail:

Donpipe 301 water base blend polyols for pipeline insulation

INTRODUCTION

This product is a type of blend polyols with water as foaming agent, which is specially researched for rigid PUF to produce thermal insulation pipes. It is widely used in steam pipes, liquefied nature gas running pipes, oil pipes and other fields. The characteristics are as follows:

(1) good flowability, by regulating formula to suit different pipe diameters.

(2) high temperature-resistance performance, long standing in 150℃

(3) excellent low temperature dimensional stability

PHYSICAL PROPERTY

Appearance	Light yellow to brown transparent liquid
Hydroxyl value mgKOH/g	250-450
Dynamic viscosity（25℃） mPa.S	300-600
Density （20℃） g/ml	1.10-1.16
Storage temperature ℃	10-25
Storage stability month	6

TECHNOLOGY AND REACTIVITY (Component temperature is 20℃, the actual value is varied according to pipe diameter and processing condition.)

	Manual mixing	High pressure machine
Ratio（POL/ISO）	1:1.40-1.1.60	1:1.40-1.60
Rise time s	20-40	15-35
Gel time s	80-200	80-160
Tack free time s	≥150	≥150
Free density kg/m³	34.0-36.0	33.0-35.0

FOAM PERFORMANCES

Mold density	GB 6343	60-80kg/m³
Closed-cell rate	GB 10799	≥90%
Thermal conductivity （15℃）	GB 3399	≤33mW/(m.K)
Compression strength	GB/T8813	≥250kPa
Water absorption	GB 8810	≤3（V/V）%
Dimensional stability 24h -30℃	GB/T8811	≤1.0%
24h 100℃	GB/T8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

To create more value for customers is our business philosophy; customer growing is our working chase for Manufacturer for Pu Binder For Bonding Scrap Foam - Donpipe 301 water base blend polyols for pipeline insulation – INOV , The product will supply to all over the world, such as: Oman, Florida, Hungary, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.

Donboiler 203 Cp/Ip Base Blend Polyols

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

Donfoam 601 Water Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

Low Hardness Polyurethane System

Polyurethane Rigid Foam System

Pu Binder For Bonding Scrap Foam

Pu Binder For Mould Processing Product

Quasi Mdi-Terminated System Mdi

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!