Manufacturer for Pu Binder For Bonding Scrap Foam - Donspray 502 HCFC-141b base blend polyols – INOV
Manufacturer for Pu Binder For Bonding Scrap Foam - Donspray 502 HCFC-141b base blend polyols – INOV Detail:
Donspray 502 HCFC-141b base blend polyols
INTRODUCTION
DonSpray 502 is spray blend polyols with HCFC-141B as blowing agent, it reacts with isocyanate to produce foam which has excellent performances, which are as follows,
1) fine and uniformity cells
2) low thermal conductivity
3) perfect fire resistance
4) excellent low temperature dimentional stability.
It applies to all kinds of thermal insulation projects which use the spray, such as cold rooms, large pots, large-scale pipelines and construction out-wall or inner-wall etc.
PHYSICAL PROPERTY
Appearance
Hydroxyl Value mgKOH/g Dynamic Viscosity (25 ℃) mpa.s Specific gravity (20 ℃ ) g/ml Storage Temperature ℃ Storage Stability month |
Pale yellow to brown viscous liquid 200-300 100-200 1.12-1.20 10-25 6 |
RECOMMENDED RATIO
pbw |
|
DonSpray 502 blend polyols
Isocyanate MDI |
100 100-105 |
Reactivity Characteristics (Component temperature is 20℃, the actual value is varied according to pipe diameter and processing condition.)
Cream Time s
Gel Time s |
3-5 6-10 |
FOAM PERFORMANCES
items |
Test Method |
Index |
Spray Density
Closed-cell Rate Initial Thermal Conductivity(15℃) Compressive Strength Adhesive Strength Elongation at break Dimentional Stability 24h -20℃ 24h 70℃ Water Absorption Oxygen Index |
GB 6343 GB 10799 GB 3399 GB/T8813 GB/T16777 GB/T9641 GB/T8811
GB 8810 GB 8624 |
≥32kg/m3 ≥90% ≤24mW/(m.K) ≥150kPa ≥120kPa ≥10% ≤1% ≤1.5% ≤3% ≥26 |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Manufacturer for Pu Binder For Bonding Scrap Foam - Donspray 502 HCFC-141b base blend polyols – INOV , The product will supply to all over the world, such as: Vietnam, Tajikistan, Rwanda, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
By Pearl Permewan from Muscat - 2018.10.09 19:07
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Phyllis from Swedish - 2017.09.29 11:19