China OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 102 HCFC-141B base blend polyols – INOV Manufacturer and Supplier

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 102 HCFC-141B base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We now have a specialist, efficiency workforce to deliver excellent service for our purchaser. We always follow the tenet of customer-oriented, details-focused for Casting Pu Shoe Mould Resin, Donboiler 203 Cp/Ip Base Blend Polyols, Solvent Resistant System, We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 102 HCFC-141B base blend polyols – INOV Detail:

Doncool 102 HCFC-141B base blend polyols

INTRODUCTION

DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,

1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity

2. Excellent low temperature dimension stability and cohesiveness

3. Demould time 6~8 minutes

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	300-360
Dynamic viscosity（25℃） mPa.S	250-500
Specific gravity (20℃) g/ml	1.10-1.15
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
POL: ISO	1.0:1.1

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12±2	10±2
Gel time s	70-90	50-70
Tack free time s	100-120	80-100
Free density kg/m³	24-26	24-26

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥92%
Thermal conductivity （15℃）	GB/T 3399	≤19 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

With our outstanding administration, powerful technical capability and strict top quality handle procedure, we go on to provide our purchasers with reliable good quality, reasonable selling prices and excellent services. We goal at becoming certainly one of your most responsible partners and earning your gratification for OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Surabaya, Wellington, Chile, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and perfect service . We also warmly welcome customers to visit our company and purchase our products.

Castable Polyurethane Prepolymer

Castable Polyurethane Shoe Upper Prepolymer

Doncool 103 Cp/Ip Base Blend Polyols

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

Polyurethane Rigid Foam

Pu Binder For Bonding Scrap Foam

Refrigerator&Insulation Containers

Thermoplastic Polyurethane Resin

Three Component Mdi Polyurethane System Mdi

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.

By EliecerJimenez from Costa rica - 2018.10.09 19:07

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.

By Christian from Iceland - 2018.09.08 17:09

Write your message here and send it to us