China OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Manufacturer and Supplier

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Tdi Elastomer Tdi, Donfoam 602 Hcfc-141b Base Blend Polyols, Donfoam 603 Ecomate Base Blend Polyols, For even more inquires remember to do not hesitate to get in touch with us. Thank you - Your support continuously inspires us.

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:

Doncool 103 CP/IP base blend polyols

INTRODUCTION

Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows

1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low

2. Excellent low-temperature dimensional stability and good cohesiveness;

3. Demoulding time is 6-8 minutes.

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	360-420
Dynamic viscosity（25℃） mPa.S	3000-4000
Specific gravity (20℃) g/ml	1.06-1.08
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
CP or CP/IP	12-14
Isocyanate	136-142

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12-16	8-12
Gel time s	75-85	50-70
Tack free time s	100-120	70-100
Free density kg/m³	25-26	24-25

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal conductivity （15℃）	GB/T 3399	≤22 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: kazakhstan, Kuwait, Mauritania, Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Donboiler 212 Hcfc-141b Base Blend Polyols

Donboiler 214 Hfc-245fa Base Blend Polyols

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 103 Cp/Ip Base Blend Polyols

Donspray 501 Water Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

High Hardness Two Component System

Polyurethane Rigid Foam

Pu Binder For Mould Processing Product

Solvent Resistance Curing System

Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!