English

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Featured Image
  • OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for Concrete Admixture, Modified Silane, Sun Shield, Being a young growing company, we might not the best, but we are trying our best to be your good partner.
OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance

Yellowish-brown transparent liquid
Hydroxyl Value                 mgKOH/g

320-370
Dynamic Viscosity /25℃          mPa.s

4000-5000
Specific Gravity   /20℃          g/ml

1.05-1.10
Storage Temperature             ℃

10-20
Shelf life (unmixed materials)※     Month

3
Shelf life (premixed materials) ※    Month

1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

 

pbw
DonCool 106 blend polyols

100
CP

12.5
LBA

7
ISO

143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS  (Material Temperature is 20℃, the actual value varied as per process conditions)

 

Manual Mixing（low pressure machine)

High Pressure Machine Mixing
Cream Time              s

Gel time                 s

Tack free time            s

Free density           kg/m3

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density GB/T 6343 30-32kg/m3
Closed-cell rate GB/T 10799 ≥90%
Thermal Conductivity（10℃） GB/T 3399 ≤18.5 mW/(m.K)
Compressive strength GB/T 8813 ≥140kPa
Dimensional stability       24h  -20℃ GB/T 8811

 

 ≤1.0%

24h  100℃

 ≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV detail pictures

Related Product Guide:
Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Ukraine, Hongkong, Japan, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our best to serve you.

    • This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By April from Barcelona - 2017.04.28 15:45
    We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
    5 Stars By Sharon from Philippines - 2018.10.01 14:14
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close