OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV
OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:
Doncool 106 CP/ HFO-1233zd base blend polyols
INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
| Appearance |
Yellowish-brown transparent liquid |
| Hydroxyl Value mgKOH/g |
320-370 |
| Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
| Specific Gravity /20℃ g/ml |
1.05-1.10 |
| Storage Temperature ℃ |
10-20 |
| Shelf life (unmixed materials)※ Month |
3 |
| Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 106 blend polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 30-32kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤18.5 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and excellent excellent management throughout all stages of creation enables us to guarantee total buyer satisfaction for OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: kazakhstan, Turkey, Ireland, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Elma from Uzbekistan - 2017.08.18 18:38
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Beryl from Ukraine - 2017.06.16 18:23
