Professional China Skin Foam - Flexible Foams Series – INOV
Professional China Skin Foam - Flexible Foams Series – INOV Detail:
Flexible Foams Series
INTRODUCTION
This series of polyether polyol is suitable for producing flexile foam like sponge and packing material. And some of them are used for producing high resilience foam system.
APPLICATION
It can be used to produce sponge, mattress, HR foam system used for car seat, furniture, memory foam system for pillow and neck pillow.
TECHNICAL DATA SHEET
|
Brand |
Colour (APHA) |
OHV (mgKOH/g) |
Viscosity (mPa.s/25℃) |
H2O content (%) |
Acid Value (mgKOH/g) |
PH |
K+ (mg/Kg) |
Degree of unsaturation |
Application |
| INOVOL F5631 |
≤50 |
54.0-58.0 |
400-700 |
≤0.05 |
≤0.05 |
5.0-7.0 |
- |
≤0.01 |
BHT free, manufacturing mattress, furniture pads, cushions and packing materials etc. Suitable for low, medium, high density foam. |
| INOVOL F3050 |
≤50 |
54.0-58.0 |
400-700 |
≤0.05 |
≤0.05 |
5.0-7.0 |
- |
≤0.01 |
BHT free, manufacturing mattress, furniture pads, cushions and packing materials etc. Suitable for medium, high density foam. |
| INOVOL F3500 |
≤50 |
45.0-50.0 |
600-700 |
≤0.05 |
≤0.05 |
5.0-7.0 |
- |
≤0.01 |
BHT free, manufacturing mattress, furniture pads, cushions and packing materials etc. Suitable for low, medium, high density foam. |
| INOVOL 330N |
≤30 |
32.0-36.0 |
800-1000 |
≤0.05 |
≤0.08 |
5.0-7.0 |
≤3 |
≤0.07 |
BHT free, no amine, typical high activity polyether. Could be mixed with polymer polyether polyols, widely used for manicuring cold curing high resilience foam such as the seat cushion of automobile, motorcycle and bicycle. Also used for car steering wheel. |
| INOVOL F3600 |
≤30 |
26.0-30.0 |
1000-1600 |
≤0.05 |
≤0.08 |
5.0-7.0 |
≤5 |
≤0.08 |
BHT free, no amine, high molecular weight and activity polyol, widely used for manicuring high resilience block foam and modeling foam. |
| INOVOL F4700 |
≤30 |
32.0-36.0 |
900-1500 |
≤0.05 |
≤0.08 |
5.0-7.0 |
≤5 |
≤0.08 |
BHT free, no amine, typical high activity polyether. Could be mixed with polymer polyether polyols, widely used for manicuring cold curing high resilience foam such as the seat cushion of automobile, motorcycle and bicycle. Also used for car steering wheel. |
| INOVOL F8001A |
≤50 |
32.0-36.0 |
1100-1500 |
≤0.08 |
≤0.08 |
5.0-7.5 |
≤5 |
≤0.07 |
BHT free, no amine, high activity polyether polyol,can be used as the basic polyol for super soft foam or MDI system slow rebound foam. |
| INOVOL F8001B |
≤50 |
40.0-44.0 |
600-1000 |
≤0.08 |
≤0.08 |
5.0-7.5 |
≤5 |
≤0.07 |
BHT free, no amine, high activity polyether polyol,can be used as the basic polyol for super soft foam or MDI system slow rebound foam. |
| INOVOL F1030A |
≤30 |
290-320 |
180-300 |
≤0.05 |
≤0.08 |
5.0-7.5 |
≤5 |
- |
BHT free, no amine, slow rebound polyether, mainly used for slow rebound foam blocks, molded foam and other foams. |
| INOVOL F1070A |
≤30 |
220-260 |
200-350 |
≤0.05 |
≤0.08 |
5.0-7.5 |
≤5 |
- |
BHT free, no amine, slow rebound polyether, mainly used for slow rebound foam blocks, molded foam and other foams. |
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Top quality is our life. Purchaser need is our God for Professional China Skin Foam - Flexible Foams Series – INOV , The product will supply to all over the world, such as: Sri Lanka, Leicester, New York, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Odelette from Madagascar - 2018.06.09 12:42
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Sara from Ecuador - 2017.10.23 10:29
