Reasonable price Donfoam 602 Hcfc-141b Base Blend Polyols - Doncool 104 HFC-245fa base blend polyols – INOV
Reasonable price Donfoam 602 Hcfc-141b Base Blend Polyols - Doncool 104 HFC-245fa base blend polyols – INOV Detail:
Doncool 104 HFC-245fa base blend polyols
INTRODUCTION
DonCool 104 blend polyols premixed with HFC-245fa as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation.
PHYSICAL PROPERTY
Appearance |
Light yellow transparent liquid |
Hydroxyl Value mgKOH/g |
200-400 |
Dynamic Viscosity /25℃ mPa.s |
400-600 |
Specific Gravity /20℃ g/ml |
1.10-1.15 |
Storage Temperature ℃ |
10-20 |
Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
pbw |
|
DonCool 104 blend polyols |
100 |
ISO |
120-130 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
Manual Mixing(low pressure machine) |
High Pressure Machine Mixing |
|
Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
Moulding Density | GB/T 6343 | 35-37kg/m3 |
Closed-cell rate | GB/T 10799 | ≥90% |
Thermal Conductivity(10℃) | GB/T 3399 | ≤19 mW/(m.K) |
Compressive strength | GB/T 8813 | ≥130kPa |
Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Fast and fantastic quotations, informed advisers to help you choose the correct products that suits all your needs, a short manufacturing time, responsible good quality control and distinct companies for paying and shipping affairs for Reasonable price Donfoam 602 Hcfc-141b Base Blend Polyols - Doncool 104 HFC-245fa base blend polyols – INOV , The product will supply to all over the world, such as: French, Dubai, Madras, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Lillian from Thailand - 2017.11.20 15:58
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Candy from Provence - 2018.09.21 11:44