China Wholesale Doncool 104 Hfc-245fa Base Blend Polyols - Donpipe 311 water base blend polyols for pipeline holder – INOV Manufacturer and Supplier

Wholesale Doncool 104 Hfc-245fa Base Blend Polyols - Donpipe 311 water base blend polyols for pipeline holder – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Fast Demold, Pu Glue, Rigid Foam Series, Our firm warmly welcome friends from everywhere in the globe to visit, examine and negotiate business enterprise.

Wholesale Doncool 104 Hfc-245fa Base Blend Polyols - Donpipe 311 water base blend polyols for pipeline holder – INOV Detail:

Donpipe 311 water base blend polyols for pipeline holder

INTRODUCTION

DonPipe 311 is a kind of blend polyether polyol with water as foaming agent, polyol as the main raw material, mixed with special auxiliary agent. It is developed for propping of water, oil or gas pipelines, furniture and other products，also with moisture proof and heat preservation functions . The polyurethane product prepared by reacting it with isocyanate has the following advantages:

– Environment friendly, without destroying the ozone layer

– High compressive strength of foam

– Fine and smooth Foam cell , with good waterproof and moisture-proof performance

PHYSICAL PROPERTY

DonPipe 311

Appearance Hydroxyl value mgKOH/g

Dynamic viscosity （25℃） mPa.S

Density （20℃） g/ml

Storage temperature ℃

Storage stability months

Light yellow transparent viscous liquid

300-400

800-1000

1.1-1.16

10-25

RECOMMENDED RATIO

Pbw

DonPipe 311Isocyanate

100

100-120

TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)

Manual mix

High pressure

Raw material temperature ℃

CT S

GT S

TFT S

Free density Kg/m³

20-25

30-80

100-200

120-240

80-500

20-25

20-70

80-160

100-200

80-500

FOAM PERFORMANCES

old density

Close-cell rate

Thermal conductivity （10℃）

Compression strength）

Dimensional stability 24h -20℃

24h 100℃

Flammability

GB/T 6343

GB/T 10799

GB/T 3399

GB/T 8813

GB/T 8811

GB/T 8624

≥100 Kg/m3

≥90%

≤22mW/m.k

≥800 KPa

≤0.5%

≤1.0%

B3、B2、B1

Product detail pictures:

Related Product Guide:

Our advancement depends on the superior gear ,superb talents and consistently strengthened technology forces for Wholesale Doncool 104 Hfc-245fa Base Blend Polyols - Donpipe 311 water base blend polyols for pipeline holder – INOV , The product will supply to all over the world, such as: Philippines, Belarus, Indonesia, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.

Castable Polyurethane Shoe Mould Prepolymer

Doncool 104 Hfc-245fa Base Blend Polyols

Donfoam 601 Water Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

Pu Binder For Bonding Scrap Foam

Pu System For Pipeline Insulation

Quasi Mdi-Terminated System Mdi

Solvent Resistance Curing System

Thermoplastic Polyurethane Series

Three Component Mdi Polyurethane System Mdi

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Laura from Swaziland - 2018.09.23 18:44

The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.

By Miranda from Ghana - 2017.02.28 14:19

Write your message here and send it to us