Wholesale Solar Heater - Pu Foam Insole System – INOV
Wholesale Solar Heater - Pu Foam Insole System – INOV Detail:
Pu Foam Insole System
INTRODUCTION
PU foam insole system is the polyether based materials, being used for the production of flexible polyurethane foot beds and sock liners. The final wares enjoy good physical properties and good resilience. The insole density and hardness are adjustble.
PHYSICAL PROPERTIES
|
Type |
DXD-01A |
DXD-01B |
|
Appearance |
Milky white viscous liquid |
Colorless or light yellow liquid. |
|
Mix ratio(by weight) |
100 |
55~60 |
|
Material temperature(℃) |
35~40 |
35~40 |
|
Mould temperature(℃) |
50~55 |
|
|
Cream time(s) |
16~18 |
|
|
Rise time(s) |
22~24 |
|
|
Gel time(s) |
120~140 |
|
|
Free rise foam density(g/cm3) |
0.15~0.2 |
|
|
Demould time(min) |
3 |
|
|
Product density(g/cm3) |
0.2~0.3 |
|
|
Hardness(Shore C) |
30~40 |
|
|
Tensile strength(MPa) |
0.45-0.50 |
|
|
Tear strength(KN/m) |
2.50-2.60 |
|
|
Elongation(%) |
280-300 |
|
Product detail pictures:
Related Product Guide:
Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for Wholesale Solar Heater - Pu Foam Insole System – INOV , The product will supply to all over the world, such as: Iran, Porto, Netherlands, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
Write your message here and send it to us




