Wholesale Solar Heater - Pu Safety Shoe Sole System – INOV
Wholesale Solar Heater - Pu Safety Shoe Sole System – INOV Detail:
Pu Safety Shoe Sole System
INTRODUCTION
PU Safety shoe-sole system is used to make safety shoe outsoles and inner soles. It is polyester-based PU system material, consist of four components, polyol, ISO, hardner and catalyst. The processing of the system is two components. The catalyst, harder, blowing agent and pigment should be mixed thoroughly with the polyol component EXD-3270A, then mix with ISO component EXD-3119B for making final wares.
PHYSICAL PROPERTIES
A, Inner soles of safety shoe-sole preparing method:
Items |
EXD-3270A |
EXD-3119B |
Ratio(weight ratio) |
100 |
85~88 |
Material temperature(℃) |
45~50 |
45~50 |
Rise time(s) |
5~7 |
|
Tack free time(s) |
30~50 |
|
Free foam density (g/cm3) |
0.35~0.4 |
|
Mould temperature(℃) |
45~55 |
|
Product density(g/cm3) |
0.5~0.55 |
|
Hardness(Shore A) |
55~65 |
|
Demould time(min) |
3 |
|
Elongation at break (%) |
≥550 |
|
Tear strength(KN/m) |
≥22 |
|
Tensile strength (MPa) |
≥6.0 |
|
Ross flexing room temperature |
50,000 times no crack |
B, Outsoles of safety shoe-sole preparing method:
Items |
EXD-3270A |
EXD-3119B |
Ratio(weight ratio) |
100 |
82~85 |
Material temperature(℃) |
45~50 |
45~50 |
Rise time(s) |
5~7 |
|
Tack free time(s) |
30~50 |
|
Free foam density (g/cm3) |
0.55~0.6 |
|
Mould temperature(℃) |
45~55 |
|
Product density(g/cm3) |
0.6~0.8 |
|
Hardness(Shore A) |
65~75 |
|
Demould time(min) |
3 |
|
Elongation at break (%) |
≥600 |
|
Tear strength(KN/m) |
≥28 |
|
Tensile strength (MPa) |
≥7.3 |
|
Ross flexing room temperature |
50,000 times no crack |
|
Demould time(min) |
3 |
|
Product density(g/cm3) |
0.2~0.3 |
|
Hardness(Shore C) |
30~40 |
|
Tensile strength(MPa) |
0.45-0.50 |
|
Tear strength(KN/m) |
2.50-2.60 |
|
Elongation(%) |
280-300 |
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Wholesale Solar Heater - Pu Safety Shoe Sole System – INOV , The product will supply to all over the world, such as: The Swiss, Honduras, Jeddah, Why we can do these? Because: A, We are honest and reliable. Our items have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It might be highly appreciated.
By Janice from Argentina - 2018.12.05 13:53
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Mildred from Germany - 2018.05.22 12:13