China 2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV Manufacturer and Supplier

2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Pu Binder, Pu Binder For Bonding Scrap Foam, Special Polyether, Any needs from you'll be paid out with our best notice!

2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV Detail:

Doncool 102 HCFC-141B base blend polyols

INTRODUCTION

DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,

1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity

2. Excellent low temperature dimension stability and cohesiveness

3. Demould time 6~8 minutes

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	300-360
Dynamic viscosity（25℃） mPa.S	250-500
Specific gravity (20℃) g/ml	1.10-1.15
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
POL: ISO	1.0:1.1

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12±2	10±2
Gel time s	70-90	50-70
Tack free time s	100-120	80-100
Free density kg/m³	24-26	24-26

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥92%
Thermal conductivity （15℃）	GB/T 3399	≤19 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for 2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: New Orleans, Ghana, USA, We have our own registered brand and our company is developing rapidly owing to high quality products, competitive price and excellent service. We sincerely hope to establish business relations with more friends from home and abroad in the near future. We look forward to your correspondence.

Castable Polyurethane Gel Insole Prepolymer