China Cheap price Doncool 104m Hfc-245fa/Cp Base Blend Polyols – Doncool 102 HCFC-141B base blend polyols – INOV Manufacturer and Supplier

Cheap price Doncool 104m Hfc-245fa/Cp Base Blend Polyols – Doncool 102 HCFC-141B base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for High Hardness Two Component System, Polyurethane Coating, Elastomer, We always regard the technology and prospects as the uppermost. We always function hard to make terrific values for our prospects and give our customers far better products and solutions & solutions.

Cheap price Doncool 104m Hfc-245fa/Cp Base Blend Polyols – Doncool 102 HCFC-141B base blend polyols – INOV Detail:

Doncool 102 HCFC-141B base blend polyols

INTRODUCTION

DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,

1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity

2. Excellent low temperature dimension stability and cohesiveness

3. Demould time 6~8 minutes

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	300-360
Dynamic viscosity（25℃） mPa.S	250-500
Specific gravity (20℃) g/ml	1.10-1.15
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
POL: ISO	1.0:1.1

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12±2	10±2
Gel time s	70-90	50-70
Tack free time s	100-120	80-100
Free density kg/m³	24-26	24-26

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥92%
Thermal conductivity （15℃）	GB/T 3399	≤19 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We support our purchasers with ideal high-quality merchandise and significant level company. Becoming the specialist manufacturer in this sector, we now have received loaded practical encounter in producing and managing for Cheap price Doncool 104m Hfc-245fa/Cp Base Blend Polyols – Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Leicester, Sao Paulo, Indonesia, In order to meet our market demands, we have paied more attention to the quality of our products and services. Now we can meet customers' special requirements for special designs. We persistently develop our enterprise spirit "quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.

Castable Polyurethane Gel Insole Prepolymer

Castable Polyurethane Shoe Mould Prepolymer

Castable Polyurethane Shoe Upper Prepolymer

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 103 Cp/Ip Base Blend Polyols

Doncool 104 Hfc-245fa Base Blend Polyols

Donfoam 603 Ecomate Base Blend Polyols

Low Hardness Polyurethane System

Pu Binder For Bonding Scrap Foam

Three Component Mdi Polyurethane System Mdi

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Mag from Anguilla - 2017.05.02 11:33

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Kim from Greece - 2017.04.08 14:55

Write your message here and send it to us