Factory Cheap Hot Casting Pu Shoe Mould Resin - DTPU-401 – INOV
Factory Cheap Hot Casting Pu Shoe Mould Resin - DTPU-401 – INOV Detail:
DOPU-201 Eco-friendly Hydrophobic Polyurethane Grouting Material
INTRODUCTION
DTPU-401 is a one component polyurethane coating with isocyanate, polyether polyol as main raw materials, moisture-curing polyurethane waterproof coating.
Especially used for horizontal plane. When this coating is applied on surface substrate, it has chemical reaction with the moisture in the air, and then it will form a seamless elastomeric rubber waterproof membrane.
APPLICATION
● Undergrounds;
● Parking garages;
● Subways in open cut method;
● Channels;
● Kitchen or bathroom;
● Floors, balcony and unexposed roofs;
● Swimming pools, man-made fountain and other pools;
● Top plate at plazas.
ADVANTAGES
● Good tensile strength and elongation;
● Both high and low temperature resistance;
● Strong adhesive;
● Seamless, no pinholes and bubbles;
● Resistance to long-term water erosion;
● Corrosion-resisting and mould-resisting;
● Convenient to apply.
TYPICAL PROPERTIES
Item | Requirement | Test Method |
Hardness | ≥50 | ASTM D 2240 |
Weight Loss | ≤20% | ASTM C 1250 |
Low temperature crack bridging | No cracking | ASTM C 1305 |
Film thickness(vertical surface) | 1.5mm±0.1mm | ASTM C 836 |
Tensile strength /MPa | 2.8 | GB/T 19250-2013 |
Elongation at break /% | 700 | GB/T 19250-2013 |
Tear strength /kN/m | 16.5 | GB/T 19250-2013 |
Stability | ≥6 months | GB/T 19250-2013 |
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
STORAGE
DTPU-401 material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources. The normal shelf life is 6 months.
TRANSPORTATION
DTPU-401 is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.
CONSTRUCTIVE SYSTEM
The system is basically consisted of substrate, additional layer, waterproof coated membrane and protection layer.
COVERAGE
1.7kg per m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.
SURFACE PREPARATION
Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.
Product detail pictures:
Related Product Guide:
Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Factory Cheap Hot Casting Pu Shoe Mould Resin - DTPU-401 – INOV , The product will supply to all over the world, such as: Indonesia, Angola, Botswana, We've been always creating new technology to streamline the production, and give products with competitive prices and high quality! Customer satisfaction is our priority! You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We are going to present our best service to satisfy all your needs! Remember to contact us right away!
By Evangeline from Mali - 2017.05.02 18:28
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Sandy from Malta - 2018.07.26 16:51