China Fast delivery Three Component Mdi Polyurethane System Mdi - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

Fast delivery Three Component Mdi Polyurethane System Mdi - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

High-quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is constantly observed and pursued by our business for Mdi Prepolymer, Case Series Case, Pu Coating, Trust us and you'll gain far more. Be sure to really feel free of charge to contact us for additional details, we assure you of our best attention at all times.

Fast delivery Three Component Mdi Polyurethane System Mdi - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Fast delivery Three Component Mdi Polyurethane System Mdi - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Bangkok, Riyadh, Romania, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.

Castable Polyurethane Shoe Mould Prepolymer

Castable Polyurethane Shoe Upper Prepolymer

Casting Polyurethane Series Cpu

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 105 Hfc-365mfc Base Blend Polyols

Donfoam 601 Water Base Blend Polyols

High Hardness Two Component System

Low Hardness Polyurethane System

Pu Binder For Bonding Scrap Foam

Thermoplastic Polyurethane Series

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!