Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV
Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV Detail:
Donpanel 422 HCFC-141b base blend polyols for continuous PUR
INTRODUCTION
DonPanel 415/PIR is a compound which consists of polyols, surfactants, catalysts, and flame retardant , mixture of HFC-245fa as blowing agent in a special ratio. The foam has good thermal insulation property, light weight, high compression strength and flame retardant and other advantages. It is widely used to produce sandwich plates, corrugated panels etc, which applies to make cold stores, cabinets, portable shelters etc.
PHYSICAL PROPERTY
DonPanel 415/PIR |
ISO |
|
Appearance |
Light yellow to brown liquid |
Brown liquid |
Hydroxyl value mgKOH/g |
200-300 |
N/A |
Dynamic viscosity (25℃) mPa.S |
300-500 |
200-250 |
Specific gravity (20℃) g/ml |
1.10-1.16 |
1.20-1.25 |
Storage temperature ℃ |
10-25 |
10-25 |
Storage stability month |
6 |
12 |
RECOMMENDED RATIO
Raw materials |
PBW |
DonPanel 415/PIR |
100 |
Isocyanate |
130-150 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
Items |
Manual mixing |
High Pressure Injection machine |
Raw material temperature ℃ |
20-25 |
20-25 |
Moulding temperature ℃ |
35-45 |
35-45 |
Cream time s |
30-50 |
20-30 |
Gel time s |
120-200 |
70-150 |
Free density kg/m3 |
28-31 |
27-30 |
FOAM PERFORMANCES
Moulding density |
ASTM D 1622-08 |
≥45kg/m3 |
Closed cell content |
ASTM D 2856 |
≥90% |
Thermal conductivity(23℃) |
ASTM C 518-10 |
≤24mW/(m.K) |
Compression strength |
ASTM D 1621-10 |
≥140kPa |
Dimensional stability 24h -20℃ 24h 100℃ |
ASTM D 2126-09 |
≤1% ≤1.5% |
Flammability |
DIN4102 |
B2 |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV , The product will supply to all over the world, such as: Italy, Japan, Bahamas, Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
By Marcy Real from Leicester - 2018.09.08 17:09
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Claire from Belgium - 2018.12.22 12:52