China High reputation Castable Polyurethane Shoe Mould Prepolymer - Doncool 103 CP/IP base blend polyols – INOV Manufacturer and Supplier

High reputation Castable Polyurethane Shoe Mould Prepolymer - Doncool 103 CP/IP base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for Playground Surface, Thermoplastic Polyurethane Resin, Automotive Industry, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!

High reputation Castable Polyurethane Shoe Mould Prepolymer - Doncool 103 CP/IP base blend polyols – INOV Detail:

Doncool 103 CP/IP base blend polyols

INTRODUCTION

Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows

1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low

2. Excellent low-temperature dimensional stability and good cohesiveness;

3. Demoulding time is 6-8 minutes.

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	360-420
Dynamic viscosity（25℃） mPa.S	3000-4000
Specific gravity (20℃) g/ml	1.06-1.08
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
CP or CP/IP	12-14
Isocyanate	136-142

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12-16	8-12
Gel time s	75-85	50-70
Tack free time s	100-120	70-100
Free density kg/m³	25-26	24-25

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal conductivity （15℃）	GB/T 3399	≤22 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for High reputation Castable Polyurethane Shoe Mould Prepolymer - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Tunisia, San Francisco, Chile, Wide selection and fast delivery to suit your needs! Our philosophy: Good quality, great service, keep improving. We've been looking forward that more and more oversea friends join in our family for further development near the future!

Castable Polyurethane Gel Insole Prepolymer

Donboiler 214 Hfc-245fa Base Blend Polyols

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 103 Cp/Ip Base Blend Polyols

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

Donfoam 602 Hcfc-141b Base Blend Polyols

Donspray 501 Water Base Blend Polyols

Low Hardness Polyurethane System

Pu Binder For Bonding Cork Crumb

Pu Binder For Bonding Scrap Foam

In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!

By Darlene from Florida - 2018.09.29 13:24

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Julia from Denver - 2018.02.08 16:45

Write your message here and send it to us