MS-930 Silicon Hloov sealant
MS-930 Silicon Hloov sealant
TAW qHIA
MS-930 yog ib tug muaj kev kawm siab, nruab nrab ib leeg-tivthaiv sealant raws li MS polymer.It reacts nrog dej rau ib tug elastic cov khoom, thiab nws tack dawb lub sij hawm thiab tua lub sij hawm yog hais txog kub thiab humidity.Increasing kub thiab humidity yuav txo tau tack dawb lub sij hawm thiab curing lub sij hawm, thaum uas tsis muaj kub thiab tsawg humidity kuj ncua kev no.
MS-930 muaj cov kev ua tau zoo ntawm elastic foob thiab adhesion.It yog tsim rau hauv qhov chaw uas yuav tsum tau elastic sealing nyob rau hauv tas li ntawd muaj tej yam nplaum zog.
MS-930 yog muaj ntxhiab, hnyav-dawb, isocyanate dawb thiab PVC free .Nws muaj zoo adhesion rau ntau yam thiab tsis tau ib phau pib qhia, uas yog tseem haum rau cov tshuaj tsuag-pleev xim rau surface.This khoom tau lawm proven kom muaj zoo kev UV kuj Yog li ntawd, nws yuav siv tau ob qho tib si nyob hauv tsev thiab nraum zoov.
NTA
A) Tsis formaldehyde, tsis muaj kuab, tsis muaj peculiar tsis hnov tsw
B) Tsis muaj silicone cov roj, tsis muaj corrosion thiab tsis muaj kuab paug rau lub substrate, ib puag ncig-phooj ywg
C) Zoo adhesion ntawm ib tug ntau yam ntawm tshuaj tsis primer
D) Zoo txhua yam khoom vaj tse
E) Ruaj xim, zoo UV kuj
F) Tib tivthaiv, ib qho yooj yim mus dlaim
G) Yuav pleev xim rau
DAIM NTAWV THOV
Kev lag luam manufacturing, xws li tsheb assembling, nkoj manufacturing, tsheb ciav hlau lub cev raug, thawv hlau qauv.
Ms-930 muaj zoo adhesion rau feem ntau ntawv uas siv: xws li txhuas (polished, Anodized), tooj dag, hlau, steel hlau, iav, ABS, nyuaj PVC thiab feem ntau thermoplastic cov ntaub ntawv. Tus zaj duab xis tso neeg sawv cev nyob rau hauv lub yas yuav tsum tau muab tshem tawm ua ntej adhesion.
Tseem ceeb daim ntawv: PE, PP, PTFE tsis lo rau lub relay, cov khoom hais los saum no yog tsis pom zoo kom xeem ua ntej.
Lub pretreatment substrate nto yuav tsum huv si, qhuav thiab roj-dawb.
KEV INDEX
|
Xim |
Dawb / Dub / Grey |
|
Odour |
N / A |
|
raws li txoj cai |
Thixotropy |
|
ceev |
1.49g / cm3 |
|
Khoom cov ntsiab lus |
100% |
|
Tua mechanism |
ya curing |
|
Deg qhuav lub sij hawm |
≤ 30min * |
|
Tua tus nqi |
4mm / 24 h * |
|
tensile zog |
≥3.0 MPa |
|
elongation |
≥ 150% |
|
kev khiav hauj lwm kub |
-40 ℃ 100 ℃ |
* Standard tej yam kev mob: kub 23 + 2 ℃, tus txheeb ze av noo 50 ± 5%
Txoj kev NTAWM DAIM NTAWV THOV
Cov coj phau ntawv los yog pneumatic cov kua nplaum phom yuav tsum tau siv rau cov mos mos ntim, thiab nws yog pom zoo kom tswj tsis pub dhau 0.2-0.4mpa thaum pneumatic cov kua nplaum phom siv. Muaj tsawg tsawg heev kub yuav ua tau kom muaj zog viscosity, nws yog pom zoo kom preheat sealants ntawm chav tsev kub ua ntej daim ntawv thov.
TXHEEJ KEV KAWM
Ms-930 yuav pleev xim rau, txawm li cas los, adaptability ntsuam xyuas pom zoo rau ib tug ntau yam ntawm cov xim tsev.
CIA
Cia kub: 5 ℃ mus rau 30 ℃
Cia lub sij hawm: 9 lub hlis nyob rau hauv tus thawj ntim.
