MS-930 Silicon i hoʻololi ʻia ke sila
MS-930 Silicon i hoʻololi ʻia ke sila
OLELO HOOLAHA
ʻO MS-930 kahi hana kiʻekiʻe, kūʻokoʻa hoʻokahi-hui sealant e pili ana i ka MS polymer. It reacts with water to form elastic material, and its tack free time and curing time is pili i ka mahana a me ka humidity.
Loaʻa i ka MS-930 ka hana piha o ka sila elastic a me ka hoʻopili.
ʻO MS-930 he meaʻalaʻole, solvent-free, isocyanate free a me PVC free . He hoʻopili maikaʻiʻo ia i nā mea he nui aʻaʻole makemake i kahi kumu mua, a he mea kūpono hoʻi no kaʻili i penaʻia.
HIʻona
A) ʻAʻohe formaldehyde, ʻaʻohe solvent, ʻaʻohe ʻala
B) ʻAʻohe aila silicone, ʻaʻohe corrosion a ʻaʻohe haumia i ka substrate, ʻoluʻolu kaiapuni
C) Hoʻopili maikaʻi i nā ʻano mea like ʻole me ka ʻole o ka primer
D) Ka waiwai mechanical maikaʻi
E) Ka waihoʻoluʻu paʻa, ka pale UV maikaʻi
F) Hoʻokahi ʻāpana, maʻalahi ke kūkulu
G) Hiki ke pena
HOOLAHA
ʻOihana hana, e like me ka hui kaʻa, hana moku, hana kino kaʻaahi, hale metala pahu.
He hoʻopili maikaʻi ʻo Ms-930 i ka hapa nui o nā mea: e like me ka alumini (polished, anodized), keleawe, ke kila, ke kila kila, ke aniani, ABS, PVC paʻakikī a me ka nui o nā mea thermoplastic. Pono e wehe ʻia ka mea hoʻokuʻu kiʻiʻoniʻoni ma ka plastic ma mua o ka hoʻopili ʻana.
Mea nui: PE, PP, PTFE ʻaʻole pili i ka relay, ʻaʻole ʻōlelo ʻia ka mea i ʻōlelo ʻia ma luna e hoʻāʻo mua.
Pono ka ʻili o ka substrate pretreatment e maʻemaʻe, maloʻo a me ka momona ʻole.
NUI HANA
| kalakala | Keʻokeʻo/ʻeleʻele/hina |
| ʻala | N/A |
| Kūlana | Thixotropy |
| ʻO ka mānoanoa | 1.49g/cm3 |
| Maʻiʻo paʻa | 100% |
| ʻO ka hana hoʻōla | Ka ho'ōla wai |
| Ka wā maloʻo o ka ʻili | ≤ 30 min* |
| Laki ho'ōla | 4mm/24h* |
| Ka ikaika tensile | ≥3.0 MPa |
| ʻO ka lōʻihi | ≥ 150% |
| Hana wela | -40 ℃ a 100 ℃ |
* Nā kūlana maʻamau: ka mahana 23 + 2 ℃, Ka haʻahaʻa pili 50±5%
KE KANAKA NOI
Pono e hoʻohana ʻia ka manual a i ʻole pneumatic glue gun no ka hoʻopili palupalu, a manaʻo ʻia e hoʻokele i loko o 0.2-0.4mpa ke hoʻohana ʻia ka pū pneumatic glue. ʻO ka haʻahaʻa haʻahaʻa loa e alakaʻi i ka hoʻonui ʻana i ka viscosity, ʻōlelo ʻia e preheat sealants i ka lumi lumi ma mua o ka noi.
HANA HOOLAHA
Hiki ke pena ʻia ʻo Ms-930, akā naʻe, ʻōlelo ʻia nā hoʻāʻo adaptability no nā ʻano pena.
HOOLAHA
Ka mahana mālama: 5 ℃ a 30 ℃
Ka manawa mālama: 9 mau mahina i loko o ka waihona mua.
