Hot-selling Water Reducing Agent Polyether - MS-910 Silicon Modified sealant – INOV
Hot-selling Water Reducing Agent Polyether - MS-910 Silicon Modified sealant – INOV Detail:
MS-910 Silicon Modified sealant
INTRODUCTION
MS-910 is a high performance, neutral single-component sealant based on MS polymer.It reacts with water to form an elastic material, and its tack free time and curing time are related to temperature and humidity.Increasing temperature and humidity can reduce tack free time and curing time, while low temperature and low humidity can also delay this process.
MS-910 has the comprehensive performance of elastic seal and adhesion.It is suitable for the parts that need elastic sealing in addition with certain adhesive strength. Ms-910 is odorless, solvent-free, isocyanate free and PVC free .It has good adhesion to many substances and does not require a primer, which is also suitable for spray-painted surface.This product has been proven to have excellent UV resistance, so it can be used both indoors and outdoors.
FEATURES
A) odorless
B) non-corrosive
C) good adhesion of a variety of substances without primer
D) good mechanical property
E) stable color, good UV resistance
F) environment-friendly — no solvent, isocyanate, halogen, etc
G) can be painted
APPLICATION
A) Prefabricated construction seam sealing
B) Road seam sealing, pipe rack, subway tunnel gap sealing, etc.
TECHNICAL INDEX
Color |
White/Black/Gray |
Odour |
N/A |
Status |
Thixotropy |
Density |
Roughly 1.41g/cm3 |
Solid content |
100% |
Curing mechanism |
Moisture curing |
Tack free time |
≤ 3h |
Curing rate |
Roughly 4mm/24h* |
Tensile strength |
2.0 MPa |
Elongation |
≥ 600% |
Elastic recovery rate |
≥ 60% |
Operating temperature |
-40℃ to 100℃ |
* Standard conditions: temperature 23 + 2 ℃,Relative humidity 50±5%
METHOD OF APPLICATION
The corresponding manual or pneumatic glue gun should be used for soft packaging, and it is recommended to control within 0.2-0.4mpa when pneumatic glue gun is used. Too low temperature will lead to increased viscosity, it is recommended to preheat sealants at room temperature before application.
COATING PERFORMANCE
Ms-910 can be painted, however, adaptability tests are recommended for a wide variety of paints.
STORAGE
Storage temperature: 5 ℃ to 30 ℃
Storage time: 9 months in the original packaging.
ATTENTION
It is recommended to read the material safety data sheet before application.See the MS-920 material safety data sheet for detailed security data.
THE STATEMENT
The data involved in this sheet are reliable and are for reference only, and we are not responsible for the results obtained by anyone using methods beyond our control..It is the responsibility of the user to determine the suitability of the products or any production method of SHANGHAI DONGDA POLYURETHANE CO., LTD. Proper preventive measures should be taken to ensure property and personal safety when operating and using products of SHANGHAI DONGDA POLYURETHANE CO., LTD. To sum up,SHANGHAI DONGDA POLYURETHANE CO., LTD makes no warranty of any kind ,express or implied for special purposes in the sales and use of the products.Further, SHANGHAI DONGDA POLYURETHANE CO., LTD. shall not be liable for any consequential or incidental damages, including economic losses.
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand abroad business" is our progress strategy for Hot-selling Water Reducing Agent Polyether - MS-910 Silicon Modified sealant – INOV , The product will supply to all over the world, such as: India, Bangladesh, Israel, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We've been able to also provide you with no cost samples to meet your needs. Best efforts are going to be produced to supply you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our items and enterprise. lot more, you'll be able to come to our factory to find out it. We'll constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. You should really feel absolutely free to make contact with us for small business and we believe we'll share the top trading practical experience with all our merchants.
By Dee Lopez from Namibia - 2017.09.29 11:19
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Agatha from moldova - 2017.08.18 18:38